Cisco SR224T-NA Administration Guide - Page 172

VLAN Management Voice VLAN 12 Configuring Voice VLAN Properties Use the Voice VLAN Properties page for the following: • View how voice VLAN is currently configured. • Configure the VLAN ID of the Voice VLAN. • Configure voice VLAN QoS settings. • Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN). • Configure how Auto Voice VLAN is triggered. To view and configure Voice VLAN properties: STEP 1 Click VLAN Management > Voice VLAN > Properties. The Properties page is displayed. • The voice VLAN settings configured on the switch are displayed in the Voice VLAN Settings (Administrative Status) block. • The voice VLAN settings that are actually being applied to the voice VLAN deployment are displayed in the Voice VLAN Settings (Operational Status) block. STEP 2 Enter values for the following fields: • Voice VLAN ID-Enter the VLAN that is to be the Voice VLAN. NOTE Changes in the voice VLAN ID, CoS/802.1p, and/or DSCP cause the switch to advertise the administrative voice VLAN as a static voice VLAN. If the option Auto Voice VLAN Activation triggered by external Voice VLAN is selected, then the default values need to be maintained. • CoS/802.1p -Select a CoS/802.1p value that to be used by LLDP-MED as a voice network policy. Refer to Administration > Discovery > LLDP > LLDP MED Network Policy for additional details. • DSCP-Selection of DSCP values that to be used by the LLDP-MED as a voice network policy. Refer to Administration > Discovery > LLDP > LLDP MED Network Policy for additional details. • Dynamic Voice VLAN-Select this field to disable or enable voice VLAN feature in one of the following ways: - Enable Auto Voice VLAN-Enable Dynamic Voice VLAN in Auto Voice VLAN mode. Cisco Small Business 200 Series Smart Switch Administration Guide 173