Cisco SR224T-NA Administration Guide - Page 86

Configuring Discovery Configuring LLDP 8 • Remote Rx-Indicates the time (in micro seconds) that the receiving link partner requests that the transmitting link partner waits before transmission of data following Low Power Idle (LPI mode). • Local Tx Echo-Indicates the local link partner's reflection of the remote link partner's Tx value. • Local Rx Echo-Indicates the local link partner's reflection of the remote link partner's Rx value. MED Details • Capabilities Supported-MED capabilities enabled on the port. • Current Capabilities-MED TLVs advertised by the port. • Device Class-LLDP-MED endpoint device class. The possible device classes are: - Endpoint Class 1-Indicates a generic endpoint class, offering basic LLDP services. - Endpoint Class 2-Indicates a media endpoint class, offering media streaming capabilities as well as all Class 1 features. - Endpoint Class 3-Indicates a communications device class, offering all Class 1 and Class 2 features plus location, 911, Layer 2 switch support and device information management capabilities. • PoE Device Type-Port PoE type, for example, powered. • PoE Power Source-Port's power source. • PoE Power Priority-Port's power priority. • PoE Power Value-Port's power value. • Hardware Revision -Hardware version. • Firmware Revision-Firmware version. • Software Revision-Software version. • Serial Number-Device serial number. • Manufacturer Name-Device manufacturer name. • Model Name-Device model name. • Asset ID-Asset ID. Cisco Small Business 200 Series Smart Switch Administration Guide 87