Compaq AP250 Compaq Deskpro Workstation AP250 Hardware Reference Guide - Page 22
Removing RIMMs, Replace the workstation access panel.
![]() |
UPC - 720591308469
View all Compaq AP250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
To install a memory module: 1. Turn off the workstation and any external devices, then disconnect the power cord from the grounded AC outlet. On a power-managed system, the power cord must be disconnected from the grounded AC outlet. 2. Remove the workstation access panel and locate the RIMM sockets. CAUTION: Be sure to follow the correct configuration guidelines respective to your memory board or your system will not function. 3. Using the following illustration as a guide, insert the RIMM module into the empty RIMM socket. Installing a RIMM module 4. Replace the workstation access panel. 5. Plug the power cord back into the grounded AC outlet. Reconnect external devices. 6. Turn on the workstation. The workstation will automatically recognize the added memory. Removing RIMMs To remove a memory module from a RIMM slot, reverse the previous procedure. Compaq Deskpro Workstation AP250 Hardware Reference Guide 2-7
![](/manual_guide/products/compaq-ap250-compaq-deskpro-workstation-ap250-hardware-reference-guide-a813d4c/22.png)