Compaq AP250 Compaq Deskpro Workstation AP250 Hardware Reference Guide - Page 32
Installing an Expansion Board, Remove the screw securing the expansion slot cover, then remove
![]() |
UPC - 720591308469
View all Compaq AP250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing an Expansion Board To install an expansion board: 1. Turn off the workstation and disconnect the power cord from the grounded AC outlet. 2. Remove the workstation access panel and locate the correct vacant slot in the workstation chassis. 3. Remove the screw securing the expansion slot cover, then remove the slot cover, as illustrated. To replace the expansion cover, reverse the procedure. Removing the screw and expansion slot cover Compaq Deskpro Workstation AP250 Hardware Reference Guide 2-17
![](/manual_guide/products/compaq-ap250-compaq-deskpro-workstation-ap250-hardware-reference-guide-a813d4c/32.png)
Compaq Deskpro Workstation AP250 Hardware Reference Guide
2-17
Compaq Confidential - Need to Know Required
Installing an Expansion Board
To
install an expansion board:
1.
Turn off the workstation and disconnect the power cord from the
grounded AC outlet.
2.
Remove the workstation access panel and locate the correct vacant
slot in the workstation chassis.
3.
Remove the screw securing the expansion slot cover, then remove
the slot cover, as illustrated.
To replace the expansion cover, reverse the procedure.
Removing the screw and expansion slot cover