Compaq AP250 Compaq Deskpro Workstation AP250 Hardware Reference Guide - Page 24
Preparing for Drive Installation, Removing the Bezel Blank
![]() |
UPC - 720591308469
View all Compaq AP250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Preparing for Drive Installation Removing the Bezel Blank Remove the drive bezel blank before installing any removable media storage device, such as a tape drive, CD-ROM or DVD-ROM drive, or diskette drive, in these bay locations. To remove the bezel blank: 1. Turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet and the back of the workstation. 3. Remove the workstation access panel. Refer to Removing the Workstation Access Panel in this chapter. 4. Remove the front bezel. Refer to Removing the .ront Bezel in this chapter. 5. Gently pull the subpanel, with the bezel blank still secured, away from the front bezel. Remove the bezel blank from the subpanel. CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. Removing the bezel blank from the subpanel Compaq Deskpro Workstation AP250 Hardware Reference Guide 2-9
![](/manual_guide/products/compaq-ap250-compaq-deskpro-workstation-ap250-hardware-reference-guide-a813d4c/24.png)