Compaq Elite 8300 Hardware Reference Guide Elite 8300 Touch All-in-One Busines - Page 26

Locating Internal Components

Get Compaq Elite 8300 PDF manuals and user guides View all Compaq Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

4. If your second display does not have a DisplayPort connector, connect a DisplayPort video adapter to the DisplayPort connector of the computer. Then connect a cable (VGA, DVI. or HDMI, depending on your application) between the adapter and a second display. NOTE: When a display port adaptor is used, the rear port cover cannot be installed unless a display port extender cable is used in conjunction with the adaptor. Figure 2-17 Connecting a Second Display Using a DisplayPort Adapter 5. Replace the rear port cover on the computer. 6. Turn on power to the computer and the second display. NOTE: Use the graphics card software or the Windows Display Settings to configure the second display as a mirrored image of the primary display or an extension of the primary display. Locating Internal Components The following sections contain procedures for removing and replacing these internal components: ● Memory ● Battery 20 Chapter 2 Hardware Repair and Upgrade

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
4.
If your second display does not have a DisplayPort connector, connect a DisplayPort video
adapter to the DisplayPort connector of the computer. Then connect a cable (VGA, DVI. or HDMI,
depending on your application) between the adapter and a second display.
NOTE:
When a display port adaptor is used, the rear port cover cannot be installed unless a
display port extender cable is used in conjunction with the adaptor.
Figure 2-17
Connecting a Second Display Using a DisplayPort Adapter
5.
Replace the rear port cover on the computer.
6.
Turn on power to the computer and the second display.
NOTE:
Use the graphics card software or the Windows Display Settings to configure the second
display as a mirrored image of the primary display or an extension of the primary display.
Locating Internal Components
The following sections contain procedures for removing and replacing these internal components:
●
Memory
●
Battery
20
Chapter 2
Hardware Repair and Upgrade