Compaq Elite 8300 Hardware Reference Guide Elite 8300 Touch All-in-One Busines - Page 31

Replacing the Battery

Get Compaq Elite 8300 PDF manuals and user guides View all Compaq Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

8. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1), then press the SODIMM down (2) so that the latches lock it in place. Figure 2-21 Installing a Memory Module NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. 9. To replace the access panel, set the panel on the back of the computer, slightly above the stand, and slide it down into place. Figure 2-22 Replacing the Access Panel 10. Reconnect the power cord and external devices. 11. Lock any security devices that were disengaged when the access panel was removed. 12. Turn on the computer. The computer automatically recognizes the additional memory when you turn on the computer. Replacing the Battery The battery is located on the system board on the lower right side of the fan. The battery that comes with the computer provides power to the real-time clock. When replacing the battery, use a battery Replacing the Battery 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
8.
To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1),
then press the SODIMM down (2) so that the latches lock it in place.
Figure 2-21
Installing a Memory Module
NOTE:
A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
9.
To replace the access panel, set the panel on the back of the computer, slightly above the stand,
and slide it down into place.
Figure 2-22
Replacing the Access Panel
10.
Reconnect the power cord and external devices.
11.
Lock any security devices that were disengaged when the access panel was removed.
12.
Turn on the computer. The computer automatically recognizes the additional memory when you
turn on the computer.
Replacing the Battery
The battery is located on the system board on the lower right side of the fan. The battery that comes
with the computer provides power to the real-time clock. When replacing the battery, use a battery
Replacing the Battery
25