Compaq Elite 8300 Hardware Reference Guide Elite 8300 Touch All-in-One Busines - Page 45
Inserting the Drive Adapter into the Cage
View all Compaq Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
17. Screw the four mounting screws into the drive adapter holding the two 2.5-inch drives. Be sure to keep the blue rubber grommets behind each screw. Figure 2-44 Inserting the Mounting Screws 18. Slide the drive adapter into the cage until it snaps in place. Be sure that the connectors on the hard disc drives are at the opening of the cage. Figure 2-45 Inserting the Drive Adapter into the Cage Replacing Drives 39
17.
Screw the four mounting screws into the drive adapter holding the two 2.5-inch drives. Be sure to
keep the blue rubber grommets behind each screw.
Figure 2-44
Inserting the Mounting Screws
18.
Slide the drive adapter into the cage until it snaps in place. Be sure that the connectors on the
hard disc drives are at the opening of the cage.
Figure 2-45
Inserting the Drive Adapter into the Cage
Replacing Drives
39