Compaq Elite 8300 Hardware Reference Guide Elite 8300 Touch All-in-One Busines - Page 37
Inserting the Mounting Screws
View all Compaq Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
9. Remove the four mounting screws from the hard disc drive. Be sure to keep the blue rubber grommets with each screw. Figure 2-30 Removing the Mounting Screws 10. Screw the four mounting screws into the new hard disc drive. Be sure to keep the blue rubber grommets behind each screw. Figure 2-31 Inserting the Mounting Screws NOTE: If you choose to install an optional 2.5-inch solid state drive (SSD) or self-encrypting drive (SED), you must 1. mount the drive in a drive adapter 2. screw the four mounting screws into the drive adapter Replacing Drives 31
9.
Remove the four mounting screws from the hard disc drive. Be sure to keep the blue rubber
grommets with each screw.
Figure 2-30
Removing the Mounting Screws
10.
Screw the four mounting screws into the new hard disc drive. Be sure to keep the blue rubber
grommets behind each screw.
Figure 2-31
Inserting the Mounting Screws
NOTE:
If you choose to install an optional 2.5-inch solid state drive (SSD) or self-encrypting
drive (SED), you must
1. mount the drive in a drive adapter
2. screw the four mounting screws into the drive adapter
Replacing Drives
31