Compaq Elite 8300 Hardware Reference Guide Elite 8300 Touch All-in-One Busines - Page 47
Connecting the Top 2.5-inch Drive, Replacing the Metal Plate
View all Compaq Elite 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
21. Be sure that excess cable length is out of the way and that cables are laying flat across the power supply. Connect the cable to the top drive. Figure 2-48 Connecting the Top 2.5-inch Drive 22. Keeping the cables flat, match up the four holes in the plate with the four posts and set the metal plate on the chassis. Slide the plate firmly to the right to secure the plate. Figure 2-49 Replacing the Metal Plate Replacing Drives 41
21.
Be sure that excess cable length is out of the way and that cables are laying flat across the power
supply. Connect the cable to the top drive.
Figure 2-48
Connecting the Top 2.5-inch Drive
22.
Keeping the cables flat, match up the four holes in the plate with the four posts and set the metal
plate on the chassis. Slide the plate firmly to the right to secure the plate.
Figure 2-49
Replacing the Metal Plate
Replacing Drives
41