Compaq Pro 6305 Maintenance and Service Guide Pro 6305 Microtower Business PC - Page 148
Preparation for Disassembly, on Access Panel, Front Bezel
View all Compaq Pro 6305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Speaker Description Speaker Spare part number 636925-001 The speaker is attached to the front of the chassis under the rotating drive cage. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 99). 2. Remove the access panel (Access Panel on page 100). 3. Remove the front bezel (Front Bezel on page 101). 4. Rotate the drive cage to its upright position. 5. Disconnect the speaker wire from the white system board labeled SPKR (1). 6. Remove the Torx screw that secures the speaker to the chassis (2). 7. Lift the speaker from the inside of the chassis to remove it (3). Figure 7-43 Removing the speaker To install the speaker, reverse the removal procedures. 138 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis