Compaq Pro 6305 Maintenance and Service Guide Pro 6305 Microtower Business PC - Page 68
Removal and Replacement Procedures Microtower MT Chassis, Installing the Front Bezel Security Screw
View all Compaq Pro 6305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
8. Install the screw through the interior of the front of the chassis into the front bezel. The screw hole is located toward the middle of the right edge of the chassis between the hard drive bay and speaker. Figure 6-4 Installing the Front Bezel Security Screw 9. Replace the access panel. 10. Reconnect the power cord and turn on the computer. 11. Lock any security devices that were disengaged when the access panel was removed. 58 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
8.
Install the screw through the interior of the front of the chassis into the front bezel. The screw hole
is located toward the middle of the right edge of the chassis between the hard drive bay and
speaker.
Figure 6-4
Installing the Front Bezel Security Screw
9.
Replace the access panel.
10.
Reconnect the power cord and turn on the computer.
11.
Lock any security devices that were disengaged when the access panel was removed.
58
Chapter 6
Removal and Replacement Procedures Microtower (MT) Chassis