Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 129
Navigating the Menus, Normal Run-time Behavior
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
7-8 Compaq ProLiant 8500 Servers Setup and Installation Guide F1 Prompt Selecting this menu choice enables you to continue booting without a keyboard or monitor. This feature is useful for service and diagnostic purposes, allowing you to continue the boot up process without attaching a monitor and keyboard and their respective cables. Contrast You can adjust the level of contrast on the Integrated Display by using the up and down arrows. Press the Up arrow to increase the contrast, and press the Down arrow to decrease the contrast. Navigating the Menus The Compaq Integrated Management Display is menu-driven and easy to use. This section provides information on how to navigate and use the menus. Normal Run-time Behavior After configuring the display and rebooting the server, a series of server POST (Power-On Self-Test) operations appears. The first screen you will see after rebooting the server shows the model number and IMD firmware revision of your display, then the POST screen appears. During POST, the display indicates that the server test is in progress by a spinning bar beside the menu item. When the test is finished, the Integrated Management Display shows a check mark by the completed menu item. A check mark tells you the test is complete, but does not necessarily mean the test was free from errors. If an error occurs during POST, the server logs the error to the Integrated Management Display under Unviewed Events and requires you to view the error before proceeding to any other menu choices. If there are no errors, you will see the default idle screen text. See Figure 7-1, "Idle Screen Text." This screen could be different if you changed the text during configuration.