Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 85
Mass Storage, System Information Menu of the IMD. See Integrated
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Installing Hardware Options 4-17 10. Replace the memory expansion board and Processor and Memory module by reversing steps 1 through 3. 11. Turn on the server. See Chapter 2, "Server Installation." 12. If the server does not power up, verify that system interlock LEDs are normal. See Table 3-2, "System Interconnect Status Indicators" in Chapter 3, "Server Operation." 13. Verify that the memory was installed correctly by reviewing the POST messages on the system console or memory information under the System Information Menu of the IMD. See Chapter 6, "Integrated Management Log." Mass Storage The following sections provide overviews for installing hard disk drives, CD-ROM drives, and external storage devices. The ProLiant 8500 supports up to four 1-inch, Ultra2, Single Connector Assembly (SCA), hot-plug hard drives. The server ships with the media module occupied by a diskette drive and slimline CD-ROM drive. An Integrated Management Display (IMD) is included on some models.