Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 39
Attaching the Slide Rails to the Server
![]() |
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Server Installation 2-13 CAUTION: Because the ProLiant 8500 server does not have safety interlocks, it is possible for a unit to be operated without the cover and air baffles properly installed. This could cause thermal damage in the system and may void your warranty. The Rack-Mountable Compaq ProLiant Server should always be operated with the system unit cover on. Proper cooling will not be achieved if the system unit cover is left open for a long period of time. Attaching the Slide Rails to the Server 1. Carefully align the three screw holes on each side of the server and the slide rail assembly. Attach the server to the inner slide with four 8-32 slotted head screws. Figure 2-7. Attaching the slide rails to the server
![](/manual_guide/products/compaq-proliant-8500-compaq-proliant-8500-setup-installation-guide-ab59566/39.png)
Server Installation
2-13
CAUTION:
Because the ProLiant 8500 server does not have safety interlocks, it
is possible for a unit to be operated without the cover and air baffles properly
installed. This could cause thermal damage in the system and may void your
warranty.
The Rack-Mountable Compaq ProLiant Server
should always be
operated with the system unit cover on. Proper cooling will not be achieved if
the system unit cover is left open for a long period of time.
Attaching the Slide Rails to the Server
1.
Carefully align the three screw holes on each side of the server and the
slide rail assembly. Attach the server to the inner slide with four 8-32
slotted head screws.
Figure 2-7.
Attaching the slide rails to the server