Compaq ProLiant 8500 Compaq ProLiant 8500 Setup and Installation Guide - Page 89
as shown below., Secure the hot-plug drive in the drive cage by swinging the ejector lever
![]() |
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Installing Hardware Options 4-21 3. Insert the hot-plug drive into the empty drive bay, pushing until securely seated 1. 4. Secure the hot-plug drive in the drive cage by swinging the ejector lever inward 2, as shown below. 1 2 Figure 4-19. Installing a SCSI hard drive CAUTION: Before removing any hot-plug hard drive, read the important guidelines in the following two sections. 5. To remove a hot-plug SCSI hard drive, push the release button on the left of the drive and rotate the hot-plug drive ejector lever outward to unlock. Pull the drive out of the drive bay.
![](/manual_guide/products/compaq-proliant-8500-compaq-proliant-8500-setup-installation-guide-ab59566/89.png)
Installing Hardware Options
4-21
3.
Insert the hot-plug drive into the empty drive bay, pushing until securely
seated
1
.
4.
Secure the hot-plug drive in the drive cage by swinging the ejector lever
inward
2
, as shown below.
1
2
Figure 4-19.
Installing a SCSI hard drive
CAUTION:
Before removing any hot-plug hard drive, read the important
guidelines in the following two sections.
5.
To remove a hot-plug SCSI hard drive, push the release button on the
left of the drive and rotate the hot-plug drive ejector lever outward to
unlock. Pull the drive out of the drive bay.