Compaq nc6120 HP Compaq nx6110, nc6110, nx6120 and nc6120 Notebook PCs - Maint - Page 162
Disconnect the serial connector module cable
View all Compaq nc6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Removal and Replacement Procedures 2. Remove the 2 HM5.0×9.0 screw locks 1 on each side of the serial connector. 3. Lift the serial connector module and cable 2 out of the base enclosure. 4. Disconnect the serial connector module cable 3 from the system board. Removing the Serial Connector Module 6-56 Maintenance and Service Guide
6–56
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the 2 HM5.0×9.0 screw locks
1
on each side of the
serial connector.
3. Lift the serial connector module and cable
2
out of the base
enclosure.
4. Disconnect the serial connector module cable
3
from the
system board.
Removing the Serial Connector Module