Creative 70EM896106000 Owners Manual - Page 23
ADAT Optical Digital Input & Output, Headphone Output & Volume Control, Important, Sample Rate
UPC - 054651126893
View all Creative 70EM896106000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ADAT Optical Digital Input & Output The ADAT optical connectors transmit and receive 8 channels of 24-bit audio using the ADAT type 1 & 2 formats. The word clock contained in the input data stream can be used as a word clock source. See "System Settings". Optical connections have certain advantages such as immunity to electrical interference and ground loops. Make sure to use high quality glass fiber light pipes for connections longer than 1.5 meters. At the 88.2k, 96k, 176.4k or 192k sample rates, the industry standard S/MUX interleaving scheme is used for ADAT input and output. S/MUX uses additional ADAT channels to gain additional bandwidth on the existing interface. See the chart below or go here for additional information. 3 - PCIe Card & Interfaces The MicroDock Important: When using any type of digital I/O such as S/PDIF or ADAT, you MUST sample sync the two devices or clicks and pops in the audio will result. Sample Rate Number of Audio Channels 44kHz/48kHz 8 channels of 24-bit audio 88kHz or 96kHz 4 channels of 24-bit audio, using S/MUX standard interleaving 176kHz or 192kHz 2 channels of 24-bit audio, using S/MUX standard interleaving The ADAT inputs and outputs can be configured in the System Settings (page 33) to send and receive S./PDIF optical data at 44.1k, 48k, 88.2k, or 96k sample rates. S/PDIF Optical is not supported at 176.4k or 196k. Headphone Output & Volume Control The headphone output drives standard stereo headphones and the adjacent volume control sets the listening level. The headphone amplifier can drive headphones with impedance as low as 24 ohms. The headphone output uses a high-current version of the high-quality output amplifiers used on the other channels. For this reason it has a very clean signal that can be used as another stereo output if you need it. Note: PatchMix DSP does not support AC3 passthrough at this time. E-MU PCIe Digital Audio Systems 23