Cub Cadet ZTS1 42 Operation Manual - Page 20

PRODUCT CARE WARNING Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Turn off the engine, remove the key, disconnect the spark plug wire(s) and the negative battery cable to prevent unintended starting. Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Follow the maintenance schedule given below. This chart describes service guidelines only. Refer to the Engine Operator's Manual for engine maintenance items listed in the table below. NOTE: Maintenance schedule continues onto the next page. Before Each Use After Every First 5 10 Hours Hours Every 25 Hours Every 50 Hours Every 100 Hours Every 200 Hours Prior to Storing See Engine Manual P Check/Clean Engine Intake Screens & Cooling Fans # Check/Clean Exhaust Manifold, Muffler Pipe, & Muffler Shields # P Check/Clean Top and Underside of Deck, Under & Around Spindle P Covers, Belt Area # Check/Clean Around Fuses, Wiring & Wiring Harnesses # P Check/Clean Around Transmission, Axle & Fans # P Check/Add/Change Transmission Fluid as needed Check Air Filter for Dirty, Loose or Damaged Parts P Check Engine Oil Level P Clean Battery Terminals Grease All Lubrication Points Check Engine Intake Screen/Clean as Needed Check Blades/Sharpen or Replace as Needed Check Tire Pressure Check/Clean Underside of Deck P Check Safety Interlock System Check Mower Blade Stop Time Inspect & Lube Deck Wheels Inspect & Lube Steering Joint Check Deck Level/Pitch P P P P P P P P P P P 20 P P P P P P P P P P P P P P P