D-Link DCH-M225 User Manual - Page 21
Web-based Configuration Utility
View all D-Link DCH-M225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Section 2 - Product Setup Web-based Configuration Utility Use the web-based configuration utility to launch the Setup Wizard and/or to change wireless and network settings. 1. Plug the DCH-M225 into an available outlet near your router. You can move it to a more suitable location after configuration. 2. Open the wireless utility on your wireless device or computer. Select the Wi-Fi Network Name and enter the Wi-Fi Password from your Wi-Fi Configuration Card. Wi-Fi Name(SSID): dlink-2c19 Wi-Fi Password: gccnu80856 Web browser link: http://dlinkap2c19.local. 3. Then open a web-browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter http://dlinkap.local./. Or, you can enter the default IP address of the DCH-M225, which is 192.168.0.50*. If you have multiple DCH-M225 devices on the network, you can access the web-based configuration utility using the following: http://dlinkapxxxx.local./, where xxxx is the last four digits of the DCH-M225's MAC address. * Once the DCH-M225 connects to your router using the default IP address, it will be assigned a new IP address based on your router/network's DHCP settings. You will need to log in to your router and view the DHCP table to see what IP address was assigned to the DCH-M225. The MAC address is printed on the label on the DCH-M225. D-Link DCH-M225 User Manual 17