D-Link DCH-M225 User Manual - Page 28

Section 3 - Configuration Wi-Fi Settings This page lets you configure the Wi-Fi Network you would like your DCH-M225 to connect to. Use Site Survey to scan available Wi-Fi networks so you can select the one you would like to extend. To access this page from the Home page, click on the Settings drop-down menu at the top of the page and select Wi-Fi. Wireless Mode: This is set to Repeater mode and cannot be changed. Wi-Fi Network Click Scan to use Site Survey to scan for available wireless Name (SSID): networks within range of your DCH-M225. Select the network you want to use the DCH-M225 to extend. You can also type in the name (SSID) of the wireless network. The SSID is case-sensitive and must be entered exactly the same as your router or access point. Security Mode: Select the security method that is being used by the wireless network that you have selected: WEP, WPA-Personal, or None. (For more information, refer to "Wireless Security Options" on page 54.) Password: If you select WEP or WPA-Personal, you will be required to enter the password or security key for the network you are attempting to join. Save: Click Save to save the settings and return to the Home page. Note: You can also use WPS to connect your wireless devices to the DCH-M225's extended network. For more information refer to "Connecting to Wireless Clients Using WPS" on page 36. D-Link DCH-M225 User Manual 24