D-Link DCH-M225 User Manual - Page 33
IPv6 Device Management Interface, My IPv6, Connection is, LAN IPv6 Link, Local Address, IPv6 Address
![]() |
View all D-Link DCH-M225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Section 3 - Configuration IPv6 Device Management Interface (con'd) My IPv6 Select Static IPv6 to manually assign an IP address to the Connection is: DCH-M225. IPv6 Address: Enter the IPv6 Address that you want to assign to the extended network AP. This address should be outside of the uplink router's DHCP address pool. Subnet Prefix Enter the length of the IPv6 subnet prefix. Length: Default Enter the Default Gateway. (Usually this is the IP address Gateway: of the uplink router.) Primary DNS Enter the Primary DNS Server address. Server: Secondary DNS Enter the Secondary DNS Server address. This is optional Server: but will provide backup if the primary server fails. My IPv6 Select Link-local only to set an IPv6 address for only the Connection is: local network. LAN IPv6 Link- Displays the LAN IPv6 Link-Local Address of the DCH-M225. Local Address: D-Link DCH-M225 User Manual 29
![](/manual_guide/products/dlink-dchm225-user-manual-d575455/33.png)