D-Link DCH-M225 User Manual - Page 50
Never Dial a Connection, LAN Settings - d link factory reset
![]() |
View all D-Link DCH-M225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Section 5 - Troubleshooting • Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the Reset button to restore these settings to their defaults. Click OK three times. • Close your web browser (if open) and open it. • Access the Web Management. Open your web browser and enter the IP address of your DCH-M225 in the address bar. This should open the login page for your Web Management. • If you still cannot access the configuration, unplug the device for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 3. What can I do if I forget my password? If you forget your password, you must reset your DCH-M225 Unfortunately, this process will change all your settings back to the factory default settings. To reset the DCH-M225, locate the reset button (hole) on the bottom of the unit. With the device plugged in, use a paper clip to hold the button down for 10 seconds. Release the button and Reset the device will reboot. Wait about 30 seconds to access the DCH-M225. The default IP address is 192.168.0.50. When logging in, leave the password field empty. DCH-M225 Input: 100-240VAC, 50-60Hz, 0.3A FCC ID:KA2CHM225A1 IC: 4216A-CHM225A1 Model: DCH-M225A1 CAN ICES-3 (B)/NMB-3(B) P/N: BCHM225LNA...A1 S/N:RZEP1YMXXXXXX H/W Ver.: A1 F/W Ver.:1.00 D-Link DCH-M225 User Manual 46
![](/manual_guide/products/dlink-dchm225-user-manual-d575455/50.png)