D-Link DE-1824EI User Guide - Page 50

Out-of-band management and console, settings, System Restart Out-of-Band Baud Rate

Page 50 highlights

10BASE-T Stackable Hubs Out-of-band management and console settings You can use the Out-of-Band/Console Setting menu to choose whether to use the hub's RS-232C serial port for console management or for out-of-band TCP/IP communications using SLIP, and to set the bit rate used for SLIP communications. The following fields can be set: ♦ System Restart Out-of-Band Baud Rate: determines the serial port bit rate that will be used the next time the hub is restarted. Applies only when the serial port is being used for out-of-band (SLIP) management; it does not apply when the port is used for the console port. Available speeds are 1200, 2400, 9600, and 19200 bits per second. ♦ Out-of-Band Dial Up Phone Number: stored as a reference for the benefit of the system manager; does not actually cause the hub to dial out. ♦ System Restart Serial Port Setting: determines whether the serial port should be used for out-of-band (SLIP) management or for console management, starting from the next time the hub is restarted. 6-8 Using the Console Interface

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87

10BASE-T Stackable Hubs
Out-of-band management and console
settings
You can use the Out-of-Band/Console Setting menu to choose whether to use
the hub’s RS-232C serial port for console management or for out-of-band
TCP/IP communications using SLIP, and to set the bit rate used for SLIP
communications.
The following fields can be set:
System Restart Out-of-Band Baud Rate:
determines the serial port
bit rate that will be used the next time the hub is restarted.
Applies
only when the serial port is being used for out-of-band (SLIP)
management; it does not apply when the port is used for the console
port. Available speeds are 1200, 2400, 9600, and 19200 bits per
second.
Out-of-Band Dial Up Phone Number:
stored as a reference for the
benefit of the system manager; does not actually cause the hub to dial
out.
System Restart Serial Port Setting:
determines whether the serial
port should be used for out-of-band (SLIP) management or for
console management, starting from the next time the hub is restarted.
6-8
Using the Console Interface