D-Link DE-1824EI User Guide - Page 51
Software Updates
UPC - 790069217593
View all D-Link DE-1824EI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
10BASE-T Stackable Hubs Figure 6 -5 Out-of-Band/Console Setting Menu Software Updates The hub is capable of obtaining its boot-time configuration information, as well as updated versions of its internal firmware, using TFTP (the Trivial File Transfer Protocol) and BOOTP (the BOOTstrap Protocol). You can use the Software Update menu to control this feature. The fields you can set in this menu are: ♦ Software Update Determines whether or not the hub will try to look for a configuration file over the network. If set to Disable, none of the fields below have any effect. ♦ Software Update Mode Set to either Network or Out-of-band. Determines whether the configuration file should be obtained through the Ethernet network or through the console port. ♦ Boot Protocol Set to either TFTP ONLY or BOOTP&TFTP. Applies only if the S/W Update Control is enabled. Using the Console Interface 6-9