D-Link DES-3852 Product Manual - Page 268
show authen application, create authen server_host, Enable Method List
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show authen application Purpose Syntax Description Parameters Restrictions Used to display authentication methods for the various applications on the Switch. show authen application This command will display all of the authentication method lists (login, enable administrator privileges) for Switch configuration applications (console, telnet, ssh, web) currently configured on the Switch. None. None. Example usage: To display the login and enable method list for all applications on the Switch: DES-3800:admin#show authen application Command: show authen application Application ----------Console Telnet SSH HTTP Login Method List default Trinity default default Enable Method List default default default default DES-3800:admin# create authen server_host Purpose Syntax Description Parameters Used to create an authentication server host. create authen server_host protocol [tacacs | xtacacs | tacacs+ | radius] {port | key [ | none] | timeout | retransmit < 1-255>} This command will create an authentication server host for the TACACS/XTACACS/TACACS+/RADIUS security protocols on the Switch. When a user attempts to access the Switch with authentication protocol enabled, the Switch will send authentication packets to a remote TACACS/XTACACS/TACACS+/RADIUS server host on a remote host. The TACACS/XTACACS/TACACS+/RADIUS server host will then verify or deny the request and return the appropriate message to the Switch. More than one authentication protocol can be run on the same physical server host but, remember that TACACS/XTACACS/TACACS+/RADIUS are separate entities and are not compatible with each other. The maximum supported number of server hosts is 16. server_host - The IP address of the remote server host to add. protocol - The protocol used by the server host. The user may choose one of the following: tacacs - Enter this parameter if the server host utilizes the TACACS protocol. xtacacs - Enter this parameter if the server host utilizes the XTACACS protocol. tacacs+ - Enter this parameter if the server host utilizes the TACACS+ protocol. 264