D-Link DES-3852 Product Manual - Page 387
enable pim, Purpose, Syntax, Description, config pim, Parameters, Restrictions
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command show pim neighbor show pim ipmroute create pim register_checksum_include_data rp_address delete pim register_checksum_include_data rp_address show pim register_checksum_include_data_rp_list show pim active_rp Parameters {ipif | ipaddress } {group } Each command is listed, in detail, in the following sections. enable pim Purpose Used to enable the PIM function on the Switch. Syntax enable pim Description This command will enable PIM for the Switch. PIM settings must first be configured for specific IP interfaces using the config pim command. Parameters Restrictions None. Only Administrator or Operator-level users can issue this command. Usage example: To enable PIM as previously configured on the Switch: DES-3800:admin#enable pim Command: enable pim Success. DES-3800:admin# disable pim Purpose Syntax Description Parameters Restrictions Used to disable PIM function on the Switch. disable pim This command will disable PIM for the Switch. Any previously configured PIM settings will remain unchanged and may be enabled at a later time with the enable pim command. None. Only Administrator or Operator-level users can issue this command. Usage example: To disable PIM on the Switch: DES-3800:admin#disable pim Command: disable pim Success. DES-3800:admin# 383