D-Link DES-3852 Product Manual - Page 422
config mld_snooping mrouter_ports, enable mld_snooping
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 422 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To configure the MLD snooping to the default vlan with noted_timeout 250 sec and state enable: DES-3800:admin#config mld_snooping default node_timeout 250 state enable Command: config mld_snooping default node_timeout 250 state enable Success. DES-3800:admin# config mld_snooping mrouter_ports Purpose Syntax Description Parameters Restrictions Used to configure ports as router ports. config mld_snooping mrouter_ports [add|delete] The config mld_snooping mrouter_ports command allows you to designate a range of ports as being connected to multicast-enabled routers. This will ensure that all packets with such a router as its destination will reach the multicast-enabled router − regardless of protocol, etc. vlan_name - The name of the VLAN for which MLD snooping is to be configured. add | delete - Specifies to add or delete the router ports. Portlist - Specifies a range of ports to be configured Only Administrator or Operator-level users can issue this command. Usage Example: To set up port range 1-10 to be static router ports: DES-3800:admin#config mld_snooping mrouter_ports default add 1-10 Command: config mld_snooping mrouter_ports default add 1-10 Success. DES-3800:admin# enable mld_snooping Purpose Syntax Description Parameters Restrictions Used to enable MLD snooping on the switch. enable mld_snooping {forward_mcrouter_only} The enable mld_snooping command allows you to enable MLD snooping on the switch. If forward_mcrouter_only is specified, the switch will forward all multicast traffic to the multicast router, only. Otherwise, the switch forwards all multicast traffic to any IPv6 router. forward_mcrouter_only - Specifies that the switch should forward all multicast traffic to a multicast-enabled IPv6 router only. If no parameter is specified, the switch will forward all multicast traffic to any IPv6 router. Only Administrator or Operator-level users can issue this command. Usage Example: 418