D-Link DES-3852 Product Manual - Page 389
config pim register_probe_time, config pim, register_suppression_time
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config pim register_probe_time Purpose Syntax Description Parameters Restrictions Used to set a time to send a probe message from the DR to the RP before the Register Suppression time expires. config pim register_probe_time This command is used to set a time to send a probe message from the DR to the RP before the Register Suppression time expires. If a Register Stop message is received by the DR, the Register Suppression Time will be restarted. If no Register Stop message is received within the probe time, Register Packets will be resent to the RP. This command is for PIM-SM configurations only. - Configure this field to set a time to send a probe message from the DR to the RP before the Register Suppression time expires. The user may configure a time between 1-127 seconds with a default setting of 5 seconds. Only Administrator or Operator-level users can issue this command. Example usage: To configure the register probe time: DES-3800:admin#config pim register_probe_time 5 Command: config pim register_probe_time 5 Success. DES-3800:admin# config pim register_suppression_time Purpose Syntax Description Parameters Restrictions Used to configure the interval between the sending of register packets for the PIM protocol. config pim register_suppression_time This command is to be configured for the first hop router from the source. After this router sends out a register message to the RP, and the RP replies with a register stop message, it will wait for the time configured here to send out another register message to the RP. This command is for PIM-SM configurations only. - The user may set an interval time between 3-255 with a default setting of 60 seconds for the sending of register suppression time packets. The default value is 60 seconds. Only Administrator or Operator-level users can issue this command. Example usage: To configure the register suppression time: DES-3800:admin#config pim register_suppression_time 15 Command: config pim register_suppression time_15 Success. DES-3800:admin# 385