D-Link DES-3852 Product Manual - Page 397
show pim, show pim neighbor, Last Hop SPT Threshold
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 397 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show pim Purpose Syntax Description Parameters Restrictions Used to display the PIM settings, along with PIM parameters configured for the Switch. show pim {ipif } This command will display the settings for the PIM function that are accessible to the switch. - Enter the name of the IP address for which to display settings. Entering no name will display all PIM IP interfaces. None. Usage example: To view the PIM settings: DES-3800:admin# show pim Command: show pim PIM Global State : Enabled Last Hop SPT Threshold : 0 packet per second (switch to SPT tree immediately) RP SPT threshold : 0 packet per second (switch to SPT tree immediately) Register Probe Time : 5 Register Suppression Time : 60 PIM Interface Table Interface ---------Trinity System IP Address ---------11.1.1.1/8 10.53.13.30/8 Designated Router ---------10.53.13.30 11.1.1.1 Hello Interval -------30 60 J/P Interval Mode State 60 DM Disabled 60 SM Enabled Total Entries: 2 DES-3800:admin# show pim neighbor Purpose Syntax Description Parameters Restrictions Used to display PIM neighbors of the Switch. show pim neighbor {ipif | ipaddress } This command will display the PIM neighbor table for the Switch. - Enter the name of the IP interface for which to display PIM information regarding PIM neighbors. ipaddress - Enter the IP address of a PIM neighbor for which to display information. Adding no parameters to this command will display all PIM neighbors that probed the Switch. None. 393