D-Link DES-3852 Product Manual - Page 274
show authen server_group, config authen parameter response_timeout, Total Entries : 4
UPC - 790069289460
View all D-Link DES-3852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show authen server_group Purpose Syntax Description Parameters Restrictions Used to view authentication server groups on the Switch. show authen server_group This command will display authentication server groups currently configured on the Switch. This command will display the following fields: Group Name: The name of the server group currently configured on the Switch, including built in groups and user defined groups. IP Address: The IP address of the server host. Protocol: The authentication protocol used by the server host. - Enter an alphanumeric string of up to 15 characters to define the previously created server group to be viewed. Entering this command without the parameter will display all authentication server groups on the Switch. None. Example usage: To view authentication server groups currently set on the Switch. DES-3800:admin#show authen server_group Command: show authen server_group Group Name Darren TACACS tacacs TACACS tacacs+ xtacacs IP Address 10.53.13.2 Protocol -------- 10.53.13.94 (This group has no entry) (This group has no entry) Total Entries : 4 DES-3800:admin# config authen parameter response_timeout Purpose Syntax Description Parameters Restrictions Used to configure the amount of time the Switch will wait for a user to enter authentication before timing out. config authen parameter response_timeout This command will set the time the Switch will wait for a response of authentication from the user. response_timeout - Set the time, in seconds, the Switch will wait for a response of authentication from the user attempting to log in from the command line interface or telnet interface. 0 disables the timeout for the response. The default value is 30 seconds. Only Administrator-level users can issue this command. Example usage: To configure the response timeout for 60 seconds: DES-3800:admin# config authen parameter response_timeout 60 Command: config authen parameter response_timeout 60 270