D-Link DGS-1510 Quick Install Guide - Page 44
Feature, Detailed Description, Class, Usage, Max Power used by PD, Category 3
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide Feature Detailed Description • Active circuit protection automatically disables the port if there is a short while other ports remain active • For 802.3af/at capable devices it will provide the power for the following classifications below: Class Usage Max Power used by PD 0 Default 0.44 Watt to 12.95 Watt 1 Optional 0.44 Watt to 3.84 Watt 2 Optional 3.84 Watt to 6.49 Watt 3 Optional 6.49 Watt to 12.95 Watt 4 Optional (802.3at Only) 12.95 Watt to 25.5 Watt • Follow the PSE pin out standard. For an alternative solution, send the power over pins 1, 2, 3, and 6 of 8 wires. Use Category 3, 6A UTP cable for 802.3af or Category 5e, 6A UTP cable for 802.3at • The PoE switch works with all D-Link 802.3af and 802.3at capable devices and with all non-802.3af and non-802.3at capable D-Link Access Points, IP Cameras and IP Phones • The total PoE power budget of the: o DGS-1510-28P is 193 Watts o DGS-1510-28XMP is 370 Watts o DGS-1510-52XMP is 370 Watts or 740 Watts with DPS700 44