D-Link DGS-1520 Emulator - Page 1117

DGS-1520 Series Gigabit Ethernet Smart Managed Switch CLI Reference Guide Example This example shows how to display the current broadcast storm control settings on ports 1 to 6. Switch#show storm-control interface eth1/0/1-6 broadcast Interface Action Threshold Current State eth1/0/1 Drop 500/300 pps 200 pps Forwarding eth1/0/2 Drop 80/64 % 20 % Forwarding eth1/0/3 Drop 80/64 % 70 % Dropped eth1/0/4 Shutdown 60/50 % 20 % Forwarding eth1/0/5 None 60000/50000 kbps 2000 kbps Forwarding eth1/0/6 None - - Inactive Total Entries: 6 Switch# This example shows how to display all types of storm control settings on ports 1 to 2. Switch#show storm-control interface eth1/0/1-2 Polling Interval : 15 sec Shutdown Retries : Infinite Trap : Disabled Interface Storm Action Threshold Current State eth1/0/1 Broadcast Drop 80/64 % 50% Forwarding eth1/0/1 Multicast Drop 80/64 % 50% Forwarding eth1/0/1 Unicast Drop 80/64 % 50% Forwarding eth1/0/2 Broadcast Shutdown 500/300 pps - Error Disabled eth1/0/2 Multicast Shutdown 500/300 pps - Error Disabled eth1/0/2 Unicast Shutdown 500/300 pps - Error Disabled Total Entries: 6 Switch# Display Parameters Interface Action Threshold Current State The interface ID. The configured action, the possible actions are: Drop, Shutdown, None. The configured threshold. The actual traffic rate which is currently flowing though the interface. Its unit may be percentage, kbps, PPS based on the configured meter mode. Because hardware can only counts by PPS, this value of this filed may be a rough value for percentage and kbps. The current state of storm control on a given interface for a given traffic type. The possible states are: Forwarding: No storm event has been detected. Dropped: A storm event has occurred and the storm traffic exceeding the threshold is dropped. Error Disabled: The port is disabled due to a storm. Link Down: The port is physically linked down. Inactive: Indicates that storm control is not enabled for the given traffic type. 1113