D-Link DGS-1520 Emulator - Page 723

DGS-1520 Series Gigabit Ethernet Smart Managed Switch CLI Reference Guide RootDistance RootDispersion PPoll HPoll KeyID Version Association Reach Unreach Flash Timer Flags Reference Timestamp Originate Timestamp Receive Timestamp Transmit Timestamp Filter Delay Filter Offset Filter Order Offset Delay Error Bound Filter Error St Poll Reach Delay Offset Disp The total roundtrip delay to the primary reference clock. The total root dispersion to the primary reference clock. The peer poll exponent. The host poll exponent. Authentication key ID. The NTP version that the peer is using. The Association ID. Peer reaching ability. Unreached counter. Flash status word for diagnosing problems. The peer timer in seconds. The peer flags. The time that the system clock was last set or corrected. The time that the request departed for the server at the client. The time that the request arrived from the client at the server. The time that replied to the client at the server. Round-trip delay of each sample in milliseconds. Clock offset of each sample in milliseconds. Filter order of each sample. Offset of the peer clock relative to our clock. Round-trip delay to the peer. Peer dispersion. Approximate error of each sample. Stratum of the peer. Polling interval in seconds. Peer reaching ability. Round-trip delay to peer in milliseconds. Relative time of peer clock to local clock in milliseconds. Dispersion. 69-15 show ntp status This command is used to display the NTP status. show ntp status Parameters None. Default Not applicable. 719