D-Link DGS-3630-28SC Web UI Reference Guide 2 - Page 128
Reboot Schedule Settings, Send a Test Mail to All, Subject, Content, Apply, Delete All, Delete
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description characters long. Click the Add button to add a new SMTP email recipient. The fields that can be configured in Send a Test Mail to All are described below: Parameter Subject Content Description Enter the subject of the email here. This string can be up to 128 characters long. Enter the content of the email here. This string can be up to 512 characters long. Click the Apply button to accept the changes made. Click the Delete All button to delete all the entries found in the display table. Click the Delete button to delete the specified entry. Reboot Schedule Settings This window is used to display and configure the reboot schedule settings. Use this window to configure the reboot schedule of the Switch. The reboot schedule must take effect within 30 days. After the reboot schedule has taken effect and the Switch is restarted, it will generate a log message to identify that the Switch has been restarted using the reboot schedule. After a reboot or a shutdown, the reboot schedule will be deleted automatically. If the Switch was manually rebooted or powered off, before the reboot schedule could take effect, the specified reboot schedule will be cancelled. To view the following window, click Management > Reboot Schedule Settings, as shown below: Figure 4-105 Reboot Schedule Settings Window The fields that can be configured are described below: Parameter Time Interval Time Date Save Before Reboot Description Select and enter the reboot schedule time interval value here. The reboot will be initiated after the specified time interval has passed. The range is from 1 to 43200 minutes (30 days). Select and enter the time at which the reboot should be initiated here. This time uses the 24-hour format, for example, 21:30. If the date was not specified, the reboot will be initiated when the system clock reaches the time specified within the next 24 hours. Select and enter the date at which the reboot should be initiated here. This date uses the following format: DD/MM/YYYY. For example, 23/12/2015. The reboot schedule can only be initiated within 30 days of configuration. Select this option to save all configuration changes made before the reboot is initiated. Click the Apply button to accept the changes made. 116