D-Link DGS-3630-28SC Web UI Reference Guide 2 - Page 256

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Version Distance Description to RIP. The specifying of the metric allows the metric to be synced. Select the Default option to use the default metric value, which is 0. Select the global RIP version that will be used as the default version for all interfaces here. Options to choose from are v1 (RIPv1) and v2 (RIPv2). Select the Default option to specify that this feature should use the default configuration. By default, RIPv1 and RIPv2 packets are received, but only RIPv1 packets are sent. Enter the Administrative Distance for RIP here. The range is from 1 to 255. A lower value represents a better route. Select the Default option to use the default Administrative Distance for RIP, which is 100. Click the Apply button to accept the changes made. RIP Distribute List This window is used to display and configure the RIP distribution list settings. To view the following window, click L3 Features > RIP > RIP Distribute List, as shown below: Figure 6-41 RIP Distribute List Window The fields that can be configured are described below: Parameter VRF Name ACL Name Interface Name Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the access list name that will be used here. This name can be up to 32 characters long. Enter the interface name that will be used here. This name can be up to 12 characters long. Click the Apply button to accept the changes made. Click the Show Detail button to view more detailed information about the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Show Detail button, the following page will appear. Figure 6-42 RIP Distribute List (Show Detail) Window 244