D-Link DGS-3630-28SC Web UI Reference Guide 2 - Page 204
MLD Snooping Filter Table
View all D-Link DGS-3630-28SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Limit Number Exceed Action Description Enter the limit number here. This is used to set the limitation on the number of MLD cache entries that can be created. The range is from 1 to 4096. Select the exceed action here. This parameter specifies the action for handling newly learned groups when the limitation is exceeded. Options to choose from are Default, Drop and Replace. • Default - Specifies that the default action will be taken. • Drop - Specifies that the new group will be dropped. • Replace - Specifies that the new group will replace the oldest group. Except ACL Name VID Enter the standard IP access list name here. The group (*,G), or channel (S,G) permitted by the access list will be excluded from the limit. To permit a channel (S,G), specify S in the source address field and G in the destination address field of the access list entry. To permit a group (*,G), specify "any" in the source address field and G in the destination address field of the access list entry. This name can be up to 32 characters long. Alternatively, click the Please Select button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Enter the Layer 2 VLAN name on a trunk port here. This applies the filter to packets that arrive on that VLAN. The range is from 1 to 4094. Click the Apply button to accept the changes made. Click the Delete button to delete an entry based on the information entered. The fields that can be configured in Access Group Settings are described below: Parameter Unit From Port - To Port Action ACL Name VID Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Enter the standard IP access list name here. This is used to permit users to join a group (*, G), specify "any" in source address field and G in destination address field of the access list entry. This name can be up to 32 characters long. Alternatively, click the Please Select button to find and select any of the exiting access lists configured on this Switch to be used in this configuration. Enter the VLAN ID used for this configuration here. The range is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in MLD Snooping Filter Table are described below: Parameter Unit From Port - To Port Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. Click the Show Detail button to view more detailed information about the entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Please Select button, the following page will appear. 192