D-Link DGS-3630-28SC Web UI Reference Guide 2 - Page 523

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Authorization State Description Select to enable or disable the authorized state here. The option is used to enable or disable the acceptance of an authorized configuration. When authorization is enabled for authentication, the authorized attributes (for example VLAN, 802.1p default priority, bandwidth, and ACL) assigned by the RADIUS server will be accepted if the authorization status is enabled. Bandwidth and ACL are assigned on a per-port basis. If in the multi-authenticated mode, VLAN and 802.1p are assigned on a per-host basis. Otherwise, Bandwidth and ACL are assigned on a per-port basis. Click the Apply button to accept the changes made. The fields that can be configured in User Information are described below: Parameter User Name VID Password Type Password Description Enter the user name used here. This name can be up to 32 characters long. Enter the VLAN ID used here. Select the password type option here. Options to choose from are Plain Text and Encrypted. Enter the password used here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Network Access Authentication Port Settings This window is used to display and configure the network access authentication port settings. To view the following window, click Security > Network Access Authentication > Network Access Authentication Port Settings, as shown below: Figure 9-76 Network Access Authentication Port Settings Window The fields that can be configured are described below: Parameter Unit Description Select the Switch unit that will be used for this configuration here. 511