D-Link DI-764 Product Manual - Page 13

Using the Configuration Menu Home > Wireless > 802.11a Wireless Settings- choose 802.11a or 802.11b+. Here, 802.11a is selected. SSID- "default" is the default setting. All devices on the network must share the same SSID. If you change the default setting, the SSID may be up to 32 characters long. Channel- 52 is the default channel for 802.11a. All devices on the network must share the same channel. Turbo Mode- select ON or OFF. The default setting is OFF. If you enable Turbo mode on the DI-764, make sure to also enable Turbo mode on all 802.11a wireless clients or a wireless connection will not be established. WEP- select Enabled or Disabled. Disabled is the default setting. WEP Encryption- select the level of encryption desired: 64, 128 or 152-bit WEP (Wired Equivalent Privacy) If you enable encryption on the DI-764 make sure to also enable encryption on all 802.11a wireless clients or wireless connection will not be established. Key Type- select HEX or ASCII Hexadecimal digits consist of the numbers 0-9 and the letters A-F ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers from 0-127 Keys 1-4- input up to 4 WEP keys; select the one you wish to use. Apply- click Apply to save the changes. 13