D-Link DI-764 Product Manual - Page 18
Home > WAN > PPPoE, Home > LAN, Apply, Auto-reconnect, Maximum, Idle Time, Secondary
View all D-Link DI-764 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using the Configuration Menu Home > WAN > PPPoE continued Primary DNS AddressSecondary DNS Address- get this info from your ISP optional Maximum Idle Time- enter a maximum idle time during which internet connection is maintained during inactivity. To disable this feature, enter zero or enable Auto-reconnect. MTU- Maximum Transmission Unit-1472 is default-you may need to change the MTU to conform with your ISP. Auto-reconnect- if enabled, the DI-764 will automatically connect to your ISP after your system is restarted or if the connection is dropped. Apply- click Apply to save the changes. Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-764. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address- the IP address of the LAN interface. The default IP address is: 192.168.0.1 Subnet MaskLocal the subnet mask of the LAN interface. The default subnet mask is 255.255.255.0 optional Apply- click Apply to save the changes. 18