D-Link DI-764 Product Manual - Page 30

Transmit Power, RTS Threshold

Get D-Link DI-764 PDF manuals and user guides View all D-Link DI-764 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Using the Configuration Menu Advanced > Performance > 802.11a Wireless PerformanceData Rate- select 802.11a or 802.11b+. Here, 802.11a has been chosen. This screen displays the wireless performance features of the Access Point portion of the DI-764. best is the default selection Transmit Power- full is the default selection. Beacon interval- beacons are packets sent by the DI-764 to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. RTS Threshold- this value should remain at its default setting of 2342. If inconsistent data flow is a problem, only a minor modification should be made. Fragmentation- this value should also remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase your Fragmentation value within the range of 256-2346. Setting the Fragmentation value too low may result in poor performance. DTIM interval- (Delivery Traffic Indication Message) 1 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Authentication- select Open system or Shared Key Open System - the DI-764 will be visible to all devices on the network. This is the default setting Shared Key - in this mode, in order to access the DI-764 on the network, the device must be listed in the MAC Address Control List Apply- click Apply to save the changes 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
30
Using the Configuration Menu
Advanced > Performance > 802.11a
Apply-
click
Apply
to save the changes
DTIM interval-
(
D
elivery
T
raffic
I
ndication
M
essage)
1
is the default setting.
A
DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages.
RTS Threshold-
this value should remain at its
default setting of
2342
.
If incon-
sistent data flow is a problem, only a minor modification should
be made.
Beacon interval-
beacons are packets sent by the DI-764 to synchronize a wire-
less network.
Specify a value.
100
is the default setting and is
recommended.
Data Rate-
best
is the default selection
Transmit Power-
full
is the default selection.
Wireless
Performance-
select
802.11a
or
802.11b+
.
Here,
802.11a
has been
chosen. This screen displays the wireless performance
features of the Access Point portion of the DI-764.
Fragmentation-
this value should also remain at its default setting of
2346
. If
you experience a high packet error rate, you may slightly in-
crease your Fragmentation value within the range of 256-2346.
Setting the Fragmentation value too low may result in poor per-
formance.
Shared Key -
in this mode, in order to access the DI-764 on the network, the
device must be listed in the MAC Address Control List
Open System -
the DI-764 will be visible to all devices on the network. This is
the default setting
Authentication-
select
Open system
or
Shared Key