D-Link DI-764 Product Manual - Page 31

Advanced > Performance > 802.11b, Beacon interval, Basic Rates, RTS Threshold, Fragmentation

Get D-Link DI-764 PDF manuals and user guides View all D-Link DI-764 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Using the Configuration Menu Advanced > Performance > 802.11b+ Wireless PerformanceBeacon interval- RTS Threshold- Fragmentation- DTIM intervalBasic RatesTX Rates- Select 802.11a or 802.11b+. 802.11b+ is selected here. Displayed in this window are the Wireless Performance features for the Access Point portion of the DI-764. beacons are packets sent by the DI-764 to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. this value should remain at its default setting of 2342. If inconsistent data flow is a problem, only a minor modification should be made. this value should also remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase your Fragmentation value within the range of 256-2346. Setting the Fragmentation value too low may result in poor performance. (Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. choose from1-2Mbps; 1,2,5.5,11 Mbps; or 1,2,5.5,11,22 Mbps select the basic transfer rates based on the speed of the wire- less adapters on the WLAN (wireless local area network); choose from among the same ranges as those listed in the Basic Rates,above. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
31
Using the Configuration Menu
Advanced > Performance > 802.11b+
Beacon interval-
beacons are packets sent by the DI-764 to synchronize a wire-
less network.
Specify a value.
100
is the default setting and is
recommended.
Basic Rates-
choose from
1-2Mbps
;
1,2,5.5,11 Mbps
; or
1,2,5.5,11,22 Mbps
RTS Threshold-
this value should remain at its
default setting of
2342
.
If incon-
sistent data flow is a problem, only a minor modification should
be made.
Fragmentation-
this value should also remain at its default setting of
2346
. If
you experience a high packet error rate, you may slightly in-
crease your Fragmentation value within the range of 256-2346.
Setting the Fragmentation value too low may result in poor per-
formance.
Wireless
Performance-
Select
802.11a
or
802.11b+.
802.11b+
is selected here.
Dis-
played in this window are the Wireless Performance features
for the Access Point portion of the DI-764.
DTIM interval-
(
D
elivery
T
raffic
I
ndication
M
essage)
3
is the default setting.
A
DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages.
TX Rates-
select the basic transfer rates based on the speed of the wire-
less adapters on the WLAN (wireless local area network);
choose from among the same ranges as those listed in the
Basic
Rates
,above.