D-Link DIM-128 User Manual - Page 31
Digital Answering Machine, Voice recording, for North America.
UPC - 790069221057
View all D-Link DIM-128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2. ISDN Phone (acts like a telephone set, that you can communicate with the remote parties over ISDN line) To fully use the voice applications, especially the ISDN Phone service, a fullduplex audio device (sound card) is required. Full-duplex means, that your audio device can handle incoming and outgoing sound signals simultaneously (i.e. you can listen and talk at the same time). If you do not have full-duplex, then you can only hear from the caller. However, this will still let you run the answering machine function. Digital Answering Machine 1. Start RVSCommCenter. 2. Open the Service tab. Check Accept calls. Check Answerphone. 3. Open the ISDN tab, select the appropriate ISDN voice coding scheme for your location. A-law is usually used in European countries, and Mu-law for North America. 4. Make sure all the other settings in "RVS CommCenter" are correctly configured. Click Ok. 5. Run "Config" in "Configuration Utility". 6. Open "Switch type". Choose appropriate "Voice Encoding" scheme. The setting should be consistent with RVS-COM in step (3). Perform the following steps to record Voice recording 1. Start Telephone in RVS-COM program group. Click the Answerphone function bar to toggle to the ON state. (for the OFF state is for ISDN Phone utility.) - 30 -