D-Link DIM-128 User Manual - Page 6
FIRST THING TO KNOW BEFORE SOFTWARE INSTALLATION, Windows 95/98/2000, Windows NT, setup.exe
UPC - 790069221057
View all D-Link DIM-128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
FIRST THING TO KNOW BEFORE SOFTWARE INSTALLATION The ISDN TA PC Card is designed to support a wide bandwidth of interfaces/drivers for a total solution in different environments. The software setup procedures accordingly vary from interfaces/drivers to interfaces/drivers. To help you set up the software efficiently, the software installation is organized by interfaces under Windows 95/98/2000 and Windows NT respectively. The following figures are illustrated as guideline-like flow charts. If something goes wrong, track down the flow to check if there is any procedure missing while setting up; and move to the corresponding section for details. Windows 95/98/2000 VCOMM Hyper Ter minal DUN CAPI RVS-COM Center NDIS VCOMM Port Driver * PPP * V.110 * V.120 CAPI 2.0 Interface * PPP * V.110 * V.120 * X.75 * Modem * Eurofile Transfer * G3 FAX over ISDN * PPP NDIS Por t Driver ISDN Low Level Driver The blocked area indicate that after when setup.exe has been executed (see section titled "Installing Device Driver"), the Phone Dialer VCOMM Port driver, CAPI 2.0 and the ISDN Low Level Driver were also installed. You may then use Phone Dialer or the functions with VCOMM directly. For CAPI mode, however, it is required to install RVS.COM Center beforehand to enable the functions with CAPI. For NDIS mode, unless the NDIS Port Driver has been installed, the ISDN Low level Driver won't be able to work. - 5 -