D-Link DIM-128 User Manual - Page 44

CAPI Mode Installing RVS-COM Lite Make sure the RVS-COM Lite "CommCenter" has been executed before start any application in CAPI mode. For details, refer to the previous section with the same title in the Windows 95/98 environment. Applications All the applications applied in Windows NT can be executed as in Windows 95/98. For better illustrations, refer to the previous sections with the same titles. Making PPP connections 1. Run RVS-COM "CommCenter". 2. Enter "Control Panel" Æ "Modems". Click "Add" button. 3. Select "Don't detect my modem; I will select it from a list". Click "Next". 4. Select "RVS Datentechnik" - "RVS ISDN Internet PPP". Click "Next". 5. Select the COM port that is identical to the COM port assignment in "Windows Port". Click "Next". 6. Click "Finish". 7. Now you will see "RVS ISDN Internet PPP" in the modem properties list. 8. Click "Close". 9. Click "Yes", when "Modem Setup" window pops-up. 10. Click "Add" in "Remote Access Setup" dialog window. 11. Select "COM# RVS ISDN Internet PPP" in RAS device list. Click "OK". 12. Click "Continue". Then, re-start Windows NT. 13. Run RVS-COM "CommCenter". 14. Double click "Dial-Up Networking" in "My Computer". 15. If you are not new of using Dial-up Networking, click "New" command button. If this is your first connection, just skip it. Give a name for the new connection. For example, "RVS_PPP". Click "Next". 16. Select "Send my plain text password..." (recommended). Click "Next". 17. Select "RVS ISDN Internet PPP (COM#)". Click " Next". 18. Give the phone number that you want to dial to. Click "Next". 19. Click "Finish". - 43 -