D-Link DIM-128 User Manual - Page 45

20. Click "Dial" to make connection immediately. Or click "Close" to wait for later PPP applications. Making Multilink PPP connections 1. Perform the above steps in the previous section to complete the PPP connection. 2. Run RVS-COM "CommCenter". If only one COM port is assigned, you have to add another ISDN port. 3. Click the "Add" command button. Select "An ISDN channel on your local PC". Click "Next". Assign a free COM port for the second ISDN port. Click "Next". Click "Finish". 4. Make sure the second ISDN port "ISDN2" is activated (the check box is selected). Click "OK". 5. Enter "Control Panel" Æ "Modems". Click "Add" button. 6. Select "Don't detect my modem; I will select it from a list". Click "Next". 7. Select "RVS Datentechnik" - "RVS ISDN Internet PPP". Click "Next". 8. Select the COM port that you just assigned at step (2). Click "Next". 9. Click "Finish". 10. Now you will see "RVS ISDN Internet PPP #2" in the modem properties listed in "Control Panel" Æ "Modems". Click "Close". 11. Click "Yes", when "Modem Setup" window appears. 12. Click "Add" in "Remote Access Setup" dialog box. 13. Select "COM# RVS ISDN Internet PPP #2" in RAS device list. Click "OK". 14. Click "Continue". Then, re-start Windows NT. 15. Run RVS-COM "CommCenter". 16. Double click "Dial-Up Networking" in "My Computer". 17. If you are not new of using Dial-up Networking, click "New" command button. If this is your first connection, just skip it. Give the new connection name. For example, "RVS_MP". Click "Next". 18. Select "Send my plain text password..." (recommended). Click "Next". 19. Select "RVS ISDN Internet PPP (COM#)". Click " Next". 20. Give the phone number that you want to dial to. Click "Next". 21. Click "Finish". 22. Click "More" command button. 23. Select "Edit entry and modem properties". Open "Basic" tab. Select "Multiple Lines" in "Dial using" box. - 44 -