D-Link DNR-2020-04P User Manual - Page 16
Connect Your Network Camera(s
View all D-Link DNR-2020-04P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Section 2 - Installation Connect Your Network Camera(s) You can connect PoE network cameras directly to your DNR-2020-04P. For non-PoE network cameras, you will need to locate power outlets in the on-site environment then run a CAT5 UTP cable to the P1-4 ports on the NVR. 1. Connect a CAT5 UTP cable to a port marked either P1, P2, P3, or P4. 2. Connect the other end of the cable to your PoE Camera. D-Link DNR-2020-04P User Manual 12
12
D-Link DNR-2020-04P User Manual
Section 2 - Installation
Connect Your Network Camera(s)
You can connect PoE network cameras directly to your DNR-2020-04P.
For non-PoE network cameras, you will need to locate power outlets in the
on-site environment then run a CAT5 UTP cable to the P1-4 ports on the NVR.
1. Connect a CAT5 UTP cable to a port marked either P1, P2, P3, or P4.
2. Connect the other end of the cable to your PoE Camera.