D-Link DNR-2020-04P User Manual - Page 52
PoE Status, You can check the status of the PoE ports P1-P4 on the NVR from
View all D-Link DNR-2020-04P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Section 3 - Configuration PoE Status You can check the status of the PoE ports (P1-P4) on the NVR from this page. Link Status: Displays the status of the Ethernet connection Link Unlink A network connection is established. There is no network connection. PoE Consumption: Displays the status of the PoE port 15W 7W 4W 0W N/A Overload Overcurrent Total PoE Power Consumption The camera's maximum power consumption is 15 watts. The camera's maximum power consumption is 7 watts. The camera's maximum power consumption is 4 watts. PoE is not actively providing power. PoE is not supported. The total PoE power consumption is above 45 watts. Power provision has stopped. The camera's power consumption is beyond the PoE class limit. Power provision has stopped. The NVR can supply a total of 45 watts via PoE. D-Link DNR-2020-04P User Manual 48