D-Link DNR-2020-04P User Manual - Page 43
Event Settings, Connection, Motion, Detected, Passive, Infrared, Digital Input, Sound, Detection
View all D-Link DNR-2020-04P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Section 3 - Configuration Event Settings This page lets you configure what to do when an event is triggered by a camera, such as when motion is detected. The NVR can then perform an action, such as sending an e-mail notification. For Camera Event Settings and System Event Settings: Step 1: Select an event to listen for: Connection An action is executed when connection is lost. Lost: Motion An action is executed when motion is detected. Detected: Passive An action is executed when the PIR sensor is activated. Infrared: Digital Input: An action is executed when the signal voltage is above or below a specific threshold. Sound Detection: An action is executed when the camera microphone detects audio. Hard Disk When the Overwrite function is not enabled, the NVR will stop Space Full: recording when the HDD is full and will send an alert. Hard Disk An alert will be sent if there is an error with the hard disk. Error: Fan Error: An alert will be sent if there is a fan error. Network An action is executed when the NVR is disconnected from its Disconnected: network. D-Link DNR-2020-04P User Manual 39