D-Link DNR-2020-04P User Manual - Page 48
System, your changes.
View all D-Link DNR-2020-04P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Section 3 - Configuration System On this page, you can save the NVR configuration to a file and restore it when necessary, such as restarting the NVR in the event of a crash. Reset the NVR to restore all configurations to factory default. Click Save to apply your changes. System Restart: If the NVR is malfunctioning or crashes unexpectedly, click Restart on the NVR. Restarting the NVR will take about ninety seconds. Restore to This will reset all settings back to the factory defaults. Factory Default Settings: Save All the configurations can be saved as a file to the specified location. Configuration Click Save to save the file. Settings: Load You can restore the configuration file after resetting to factory Configuration default file. Click Browse to select the configuration file and restore Settings: it by clicking Load. Idle Time (Minutes): When the administrator enters all the Setup pages (except the Live Video and Playback Page), the NVR will keep track of the idle time when the user is not active. If this inactive period exceeds the specified limit, the user will be logged out and will have to log in again for security purposes. You can change the idle time limit here. Buzzer: Enable or disable the buzzer. This is an audible alarm that sounds when an event is triggered. Enable Auto Plugin: Enable or disable auto plugin. Enabling auto plugin allows the NVR to automatically detect any connected cameras on the LAN. The NVR will automatically change the secondary video profile of IP cameras once this option is enabled. D-Link DNR-2020-04P User Manual 44